Milan FWD L4-2.3L (2008)
20. Install the cushion side shield.
-
Position the cushion side shield and engage the side and rear retainers.
-
Attach the side air bag wire harness pin-type retainers to the cushion side shield.
21. Put the spring clip on the manual recliner handle. Align it to the recliner and push in, seating the spring clip.
22. Install the front seat and repower the SRS. Do not prove out the SRS at this time.
23. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test.
