Milan FWD L4-2.3L (2008)
Rear Seat Backrest, 40 Percent
Removal and Installation
1. Remove the rear seat cushion.
2. Remove the 40 percent rear seat backrest.
3. Release the lower J-strip, 4 J-clips and remove the staples from each side.
4. CAUTION: Use care when separating the backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from
the backrest foam pad.
Partially invert the trim cover separating the hook-and-loop strips and remove the first row of hog rings.
5. Continue to invert the backrest trim cover separating the hook-and-loop strips and removing all rows of hog rings working up the backrest.
