Milan FWD L4-2.3L (2008)
Passenger Seat Cushion (Part 2)
Special Tool(s)
Special Tool(s)
Removal and Installation
NOTE:
-
The air bag warning lamp illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.
-
The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
All seats
1. Remove the front seat.
2. Remove the front seat backrest.
Passenger seat with failed horizontal motor
3. To remove the occupant classification sensor (OCS) rails, remove the 2 seat track horizontal drive unit bolts. This will allow the power seat tracks
to move manually for access to the 8 OCS rail bolts.
