Milan FWD L4-2.3L (2008)
Camshaft: Removal and Replacement
Removal
Camshafts
Special Tool(s)
Material
Removal
CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while
cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure.
CAUTION: Do not rotate the camshafts or crankshaft unless instructed to do so in this procedure. Rotating the camshafts or crankshaft with
timing components loosened or removed can cause serious damage to the valves or pistons.
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the accessory drive belt.
3. If equipped, remove the 7 screws and the underbody cover.
