Milan FWD L4-2.3L (2008)
^
Stage 3: Tighten to 16 Nm (12 lb-ft).
3. Install the special tool.
4. Install the timing chain on the intake camshaft drive gear.
5. NOTE: The timing chain must be correctly engaged on the teeth of the crankshaft timing sprocket and the intake camshaft drive gear in order to
install the exhaust camshaft drive gear onto the exhaust camshaft.
Position the exhaust camshaft drive gear in the timing chain and install the gear and bolt on the exhaust camshaft.
^
Hand-tighten the bolt.
