Milan FWD L4-2.3L (2008)
B5-B6
Test C: The Compass Is Inoperative
PINPOINT TEST C: THE COMPASS IS INOPERATIVE
Normal Operation
The compass module receives voltage from the smart junction box (SJB) through circuit CBP19 (BN/WH) and is grounded through circuit GD139
(BK/YE). The compass module communicates the vehicle direction to the instrument cluster (IC) through circuits VMC30 (BU/GY) and VMC31
(YE/GN) and the direction is displayed in the instrument cluster (IC).
-
DTC U2013 (Compass Module is Not Responding) - is a continuous DTC that sets if the instrument cluster (IC) does not receive compass data on
circuits VMC30 (BU/GY) and VMC31 (YE/GN).
This pinpoint test is intended to diagnose the following:
-
Fuse
-
Wiring, terminals or connectors
-
Compass module
