Milan FWD L4-2.3L (2008)
Install the passenger air bag module into the instrument panel.
18. Install the 2 passenger air bag module bolts.
-
Tighten to 8 Nm (71 lb-in).
19. Attach the glove compartment door damper cable and close the glove compartment door.
All vehicles
20. CAUTION:
-
Do not install the driver air bag module electrical connectors by the locking buttons. Damage to the locking buttons can occur.
-
The driver air bag module electrical connector locking buttons must be in the released position when the connector is being installed,
or connector damage may occur.
-
The driver air bag module electrical connectors are unique and cannot be reversed when connected to the driver air bag module.
Match the electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the driver
air bag module.
With the locking buttons released, install the driver air bag module electrical connectors fully into the driver air bag module and seat the locking
buttons.
