Milan FWD L4-2.3L (2008)
4. Remove the transmission fluid pan.
^
Remove the bolts.
^
Using a suitable tool, separate the bead of sealer.
5. Clean the silicone from the transmission fluid pan and transaxle case surfaces thoroughly with metal surface cleaner.
Installation
1. NOTE: Do not use more than the specified amount of sealer on the pan or internal transaxle damage could occur.
Apply a bead 1-1/2 millimeters thick of sealer to the transaxle on the transmission fluid pan sealing surface.
2. Install the transmission fluid pan.
^
Tighten to 7 Nm (62 lb-in).
