Milan FWD L4-2.3L (2008)
2. Adjust the spark plug gap as necessary.
3. CAUTION: Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.
Install the spark plugs.
-
Tighten to 12 Nm (9 lb-ft).
4. NOTE: Apply a small amount of dielectric grease to the inside of the ignition coil-on-plug boots before attaching to the spark plugs.
Install the 4 ignition coils and bolts.
-
Tighten to 10 Nm (89 lb-in).