Milan FWD L4-2.3L (2008)
Transmission Position Switch/Sensor: Adjustments
Transmission Range (TR) Sensor Adjustment
Special Tool(s)
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the transmission range (TR) sensor electrical connector and the selector lever cable end.
3. NOTE: Failure to hold the selector lever, while loosening or tightening the manual control lever, will transmit rotational torque to the TR switch
causing internal damage.
Loosen the TR sensor (the automatic transaxle is shown removed for clarity).
1
Remove the nut and the manual control lever.
2
Loosen the TR sensor bolts.
4. Using the special tool, align the TR sensor and tighten the bolts.
^
Tighten to 10 Nm (89 lb-in).
