Milan FWD L4-2.3L (2008)
Clockspring Assembly / Spiral Cable: Service and Repair
CLOCKSPRING
Removal
NOTE:
-
The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.
-
The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
-
Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic
procedure again.
1. Remove the driver air bag module.
2. CAUTION: Make sure the road wheels are in the straight-ahead position. Damage to the clockspring may occur.
Remove the steering wheel.
