Milan FWD L4-2.3L (2008)
16. Through the glove compartment opening, remove the 2 passenger air bag module bolts.
17. CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment doors. Damage to the passenger air
bag module may occur.
Through the glove compartment opening, release the deployment door clips from the instrument panel and then remove the passenger air bag
module from the instrument panel.
All vehicles
18. NOTE:
-
Fusion and Milan shown, MKZ similar.
-
RH shown, LH similar.
Using a small screwdriver as shown, lift up and release the locking buttons on the passenger air bag module electrical connectors.
19. CAUTION: Do not pull the passenger air bag module electrical connectors out by the locking buttons. Damage to the locking buttons can
occur.
NOTE:
-
Fusion and Milan shown, MKZ similar:
-
RH shown, LH similar.
With the locking buttons released, remove the electrical connectors and the passenger air bag module.
