Milan FWD L4-2.3L (2008)
28. Install RCM fuse 25 (7.5A) to the SJB.
29. Connect the battery ground cable.
Reactivation
All vehicles
1. Remove restraints control module (RCM) fuse 25 (7.5A) from the SJB.
2. Disconnect the battery ground cable and wait at least one minute.
3. Connect the driver seat side air bag module electrical connector and then slide and engage the seat side air bag electrical connector locking clip.
4. Connect the LH side air curtain module electrical connector.
5. NOTE: Fusion shown, Milan and MKZ similar.
Install the LH C-pillar trim cover and the retainers.
