Milan FWD L4-2.3L (2008)
14. NOTE: RH side shown, LH side similar.
Install the RH and LH fender splash shield and the 4 screws from each side.
15. CAUTION: The steering gear/dash seal must be fully seated in the steering gear valve tower groove before the retaining clips are fully
engaged into the body. If the steering gear/dash seal is not seated to the steering gear valve tower groove and the clips are not fully
engaged to the body, water and foreign material may enter the passenger compartment, and damage the vehicle interior.
Applying hand force to the center of the seal, install the steering gear/dash seal onto the steering gear valve tower until the seal is fully seated in
the valve tower groove.
16. Install the steering gear/dash seal until the retaining clips are fully engaged into the body.
