Milan FWD L4-2.3L (2008)
17. CAUTION: Do not allow the steering column to rotate while the steering column shaft is disconnected from the steering gear or damage
to the clockspring may occur. If there is evidence that the steering column has rotated, the clockspring must be removed and recentered.
For additional information, refer to Air Bag Systems.
CAUTION: Make sure to correctly align the index marks when installing the steering gear-to-steering column shaft or unequal
right-to-left turns may occur, causing tire contact with the body and/or clockspring damage.
With the index marks properly aligned, connect the steering column shaft to the steering gear and install the bolt.
^
Tighten to 25 Nm (18 lb-ft).
18. Install the lower steering column shaft joint cover and the 2 nuts.
19. Fill the power steering system.
20. Check and, if necessary, adjust the front toe.
