Milan FWD L4-2.3L (2008)
All Wheel Drive (AWD) Vehicles
Removal and Installation
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure may
result in major service expense. New parts must be installed with the same part numbers or equivalent part, if replacement is necessary. Do not
use a replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct
retention of these parts.
All wheel drive (AWD) vehicles
1. Remove the wheel and tire.
All vehicles
2. Remove the parking brake cable bracket bolt and position the parking brake cable aside.
^
To install, tighten to 10 Nm (89 lb-in).
