Milan FWD L4-2.3L (2008)
Pressure Regulating Solenoid: Testing and Inspection
Pinpoint Tests - Non OSC Equipped Vehicle
Pinpoint Tests - Non OSC Equipped Vehicle
Special Tool(s)
Any time an electrical connector or solenoid body is disconnected, inspect the connector for pin condition, corrosion and contamination. Also inspect
the connector seal for damage. Clean, repair or install a new connector as required.
Prior to carrying out the pinpoint tests, check the following:
^
Transmission fluid level.
^
Transmission fluid condition (burned, metal particles or discolored).
^
Engine cooling system.
^
Other non-related transmission DTCs.
