Milan FWD L4-2.3L (2008)
^
Tighten to 9 Nm (80 lb-in).
12. Install the affected solenoid, the bracket and the 4 shift solenoid bracket bolts.
^
Tighten to 9 Nm (80 lb-in).
Main Control
13. NOTE: The thin longer springs are for the neutral and drive accumulator.
NOTE: Accumulator bore and pistons are matched by depth; some pistons may have steps. Install the pistons in the same bore as removed.
Install the accumulator pistons and springs.
1
Accumulator 1 and 2.
2
Accumulator N and D.