Milan FWD L4-2.3L (2008)
Windshield Washer Reservoir: Service and Repair
WASHER RESERVOIR
Exploded View
Washer Pump And Reservoir
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the RH front fender splash shield.
3. Disconnect the windshield washer pump electrical connector.
4. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical
advice. Failure to follow these instructions may result in serious personal injury.
NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before removal.
Disconnect the washer pump hose.
5. Remove the bolt and the windshield washer reservoir filler neck.
-
To install, tighten to 7 Nm (62 lb-in).
6. Remove the windshield washer reservoir fasteners and the windshield washer reservoir.
-
To install, tighten to 7 Nm (62 lb-in).