mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Trunk / Liftgate Lock Cylinder|Service and Repair|Page 7586 > < Body - Trunk Lid Will Not Latch|Page 7582
Page 1
background image

Trunk / Liftgate Lock Cylinder: Service and Repair

LUGGAGE COMPARTMENT LID LOCK CYLINDER

Special Tool(s)

Special Tool(s)

Removal and Installation

1. Remove the 12 pin-type retainers and the luggage compartment lid trim panel.
2. Disconnect the luggage compartment lid lock cylinder actuating cable from the luggage compartment lid lock cylinder.
3. If equipped, disconnect the electrical connector from the luggage compartment anti-theft inhibit switch.

Trunk / Liftgate Lock Cylinder|Service and Repair|Page 7586 > < Body - Trunk Lid Will Not Latch|Page 7582