Milan FWD L4-2.3L VIN Z (2007)
1. NOTE: The bushings must be installed with the correct orientation or increased noise and vibration may result.
Assemble the special tools to the rear subframe with the new front bushings. The upper and lower bushings are installed at the same time.
2. Align the left front bushings to the rear subframe.
1
Align the left upper bushing.
2
Align left lower bushing.
3. Press the new front bushings into the rear subframe.
4. Align the right front bushings to the rear subframe.
1
Align the right upper bushing.
2
Align the right lower bushing.
5. Press the new front bushings into the rear subframe.
Rear bushings
6. Assemble the special tools to the rear subframe with the new rear bushings. The upper and lower bushings are installed at the same time.