Milan FWD L4-2.3L VIN Z (2007)
30. Disconnect the LH side air curtain module electrical connector.
31. Attach the restraint system diagnostic tool to the LH safety side air curtain electrical connector.
32. From under the rear of the driver seat, slide and disengage the driver seat side air bag module electrical connector locking clip, and then release
the tab and disconnect the driver seat side air bag module electrical connector.
33. Attach the restraint system diagnostic tool to the vehicle harness side of the driver seat side air bag module electrical connector.
All vehicles
34. Install RCM fuse 25 (7.5A) to the SJB.
35. Connect the battery ground cable.
Reactivation
