Milan FWD L4-2.3L VIN Z (2007)
-
To install, tighten to 54 Nm (40 lb-ft).
3. Position the front and rear door weatherstrips aside.
4. Remove the front door scuff plate trim panel.
5. Remove the rear door scuff plate trim panel.
6. Remove the lower B-pillar trim panel.
-
Slide the lower B-pillar trim panel down to disengage it from the upper B-pillar trim panel.
7. Remove the upper B-pillar trim panel.
-
Remove the screw cover.
-
Remove the screw.
8. To install, reverse the removal procedure.
