mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Seat Cushion Cover - Rear|Page 8038 > < Seat Cushion Cover - Rear|Page 8036
Page 5
background image

Passenger Seat Cushion (Part 2)

Disassembly and Assembly

WARNING: 

-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

Never probe the connector on the air bag module. Doing so can result in air bag deployment, which can result in personal injury.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:

-

If a seat equipped with a SRS component is being serviced, the SRS must be depowered.

-

The air bag warning lamp illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a SRS fault.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

-

Driver seat shown, passenger seat similar.

Seat Cushion Cover - Rear|Page 8038 > < Seat Cushion Cover - Rear|Page 8036