Milan FWD L4-2.3L VIN Z (2007)
2. Disconnect the TED electrical connector.
3. CAUTION: Inspect the climate controlled seat cushion manifold and foam pad for crush or obstruction before installation and repair as
needed.
Remove the 3 nuts and TED assembly from the cushion frame.
-
To install, tighten to 6 Nm (53 lb-in).
-
To install, check for correct fit between the cushion manifold, foam pad and TED assembly, to make sure there is no air flow obstruction,
cushion crush or foreign material.
4. To install, reverse the removal procedure.
5. Install the front seat and repower the SRS. If a passenger seat has been serviced, do not prove out the SRS at this time.
Passenger seat
6. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test and prove out the SRS.
