Milan FWD L4-2.3L VIN Z (2007)
3. Disconnect the spoiler electrical connector.
4. Remove the spoiler-to-luggage compartment lid nuts.
-
To install, tighten to 6 Nm (53 lb-in).
NOTE: There are 2 pin-type retainers on the bottom of the spoiler. When removing the spoiler it is difficult to get the retainers to release. The
retainers may break during removal of the spoiler.
5. Remove the spoiler.
6. To install, reverse the removal procedure.
-
If any retainers are broken, install new retainers.
