Milan FWD L4-2.3L VIN Z (2007)
Parking Brake Cable: Service and Repair
Parking Brake Cable - Rear
Removal and Installation
NOTE: Do not use oil or grease-based lubricants on the isolators. They may cause deterioration of the rubber.
NOTE: Oil or grease-based lubricants on the isolators may cause the exhaust hanger isolator to separate from the exhaust hanger bracket during
vehicle operation.
1. Remove the floor console.
2. Loosen the parking brake control adjusting nut.
3. Disconnect the rear parking brake cables from the equalizer.
4. With the vehicle in NEUTRAL, position it on a hoist.
5. Support the muffler and tailpipe with a suitable jack stand.
