Milan FWD L4-2.3L VIN Z (2007)
13. Remove the special tool.
14. Remove the 6 mm (0.23 inch) x 18 mm (0.7 inch) bolt.
15. Remove the special tool.
16. Install the engine plug bolt.
^
To install, tighten to 20 Nm (15 ft. lbs.).
13. Remove the special tool.
14. Remove the 6 mm (0.23 inch) x 18 mm (0.7 inch) bolt.
15. Remove the special tool.
16. Install the engine plug bolt.
^
To install, tighten to 20 Nm (15 ft. lbs.).