Milan FWD L4-2.3L VIN Z (2007)
6. Alternate tightening the 1 front and 1 rear lower bolts to slide the transmission and engine together.
^
Tighten to 48 Nm (35 ft. lbs.).
7. Tighten the remaining front lower bolt (manual transmission) and rear lower stud bolt.
^
Tighten to 48 Nm (35 ft. lbs.).
8. Install the bellhousing-to-oil pan bolt.
^
Tighten to 48 Nm (35 ft. lbs.).
9. Install the 2 oil pan-to-bellhousing bolts.
^
Tighten to 48 Nm (35 ft. lbs.).
10. If equipped, install the underbody cover and the 7 screws.
11. Tighten the 3 top bellhousing-to-engine bolts.
^
Tighten to 48 Nm (35 ft. lbs.).
Automatic transmission
12. Install the battery tray.
All vehicles
13. Install the air cleaner assembly.
14. Fill the engine with clean engine oil.
