Milan FWD L4-2.3L VIN Z (2007)
19. Align the 2 retaining clips and install the RH I/P trim panel.
20. Through the glove compartment opening and the side of the I/P, install the 5 RH I/P trim panel nuts on the inside of the I/P.
21. Install the I/P end panel.
Fusion and Milan
22. CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment door.
NOTE: During air bag module installation, make sure all the deployment door clips are fully seated in the I/P.
Install the passenger air bag module into the I/P.
