Milan FWD L4-2.3L VIN Z (2007)
23. Install the 2 passenger air bag module bolts.
-
Tighten to 8 Nm (71 lb-in).
24. Attach the glove compartment door damper cable and close the door.
All vehicles
25. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
26. CAUTION:
-
Do not install the driver air bag module electrical connectors by the locking buttons. Damage to the locking buttons can occur.
-
The driver air bag module electrical connector locking buttons must be in the released position when the connector is being installed,
or connector damage may occur.
-
The driver air bag module electrical connectors are unique and cannot be reversed when connected to the driver air bag module.
