Milan FWD L4-2.3L VIN Z (2007)
All Wheel Drive (AWD) Vehicles
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in
major service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a replacement
part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of
these parts.
Front wheel drive (FWD) vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. If equipped, remove the wheel speed sensor bolt and position the sensor aside.
3. Disconnect the parking brake cable from the brake caliper.
1. Remove the clip.
2. Disconnect the parking brake cable from the brake caliper.
4. CAUTION: Do not allow the brake caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
