mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Fuel Level Sensor|Page 2607 > < Fuel Level Sensor
Page 2
background image

Removal and Installation

WARNING:

-

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly
flammable mixtures are always present and may be ignited. Failure to follow these instructions can result in personal injury.

-

Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any
fuel-related components. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions can
result in personal injury.

-

Fuel in the fuel system remains under high pressure even when the engine is not running. Before repairing or disconnecting any of the
fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel causing personal injury or a fire
hazard.

-

This procedure involves fuel handling. Be prepared for spillage at all times and always observe fuel handling precautions. Failure to
follow these instructions can result in personal injury.

1. Release the fuel system pressure.

Fuel Level Sensor|Page 2607 > < Fuel Level Sensor