Milan FWD L4-2.3L VIN Z (2007)
connector.
-
Fuel injection equipment is manufactured to very precise tolerances and fine clearances. It is therefore essential that absolute cleanliness is
observed when working with these components. Always install blanking plugs to any open orifices or tubes.
1. If servicing a liquid fuel tube quick connect coupling, release the fuel system pressure.
2. Squeeze the quick connect coupling retainer clip tabs to release the locking mechanism.
3. Push the locking mechanism outward to release the tube.
4. Remove the quick connect coupling from the tube.
Connect - Type IV
1. CAUTION: Make sure that the tube clicks into place when installing the quick connect coupling. Pull the tube to verify that it is fully
