Milan FWD L4-2.3L VIN Z (2007)
Transmission Speed Sensor: Service and Repair
Output Shaft Speed (OSS) Sensor
Output Shaft Speed (OSS) Sensor
Material
Output Shaft Sped (OSS) Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Place a drain pan beneath the output shaft speed (OSS) sensor.
3. Remove the OSS sensor.
-
Disconnect the electrical connector.
-
Remove the bolt.
-
Inspect the OSS bore.
4. Inspect the O-ring seal for nicks or cuts, install a new O-ring if necessary.
