Milan FWD L4-2.3L VIN Z (2007)
Power Distribution Module: Service and Repair
SMART JUNCTION BOX (SJB)
Removal and Installation
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
NOTE: Prior to the removal of the module, it is necessary to upload the module configuration information to the appropriate scan tool. This information
needs to be downloaded into the new module once installed.
1. Upload the module configuration information from the SJB into the scan tool.
2. Disconnect the 6 electrical connectors.
3. Remove the 2 nuts.
