Milan FWD L4-2.3L VIN Z (2007)
3. Remove the driver air bag module.
4. NOTE: Make sure the road wheels are in the straight-ahead position.
Remove the steering wheel.
5. Release the 2 tabs and position the upper steering column shroud up.
6. Remove the 3 screws and the lower steering column shroud.
7. Disconnect the clockspring electrical connector.
8. Remove the 2 clockspring screws and remove the clockspring.
Installation
All vehicles
1. Install the clockspring and the 2 screws.
2. Connect the clockspring electrical connector.
3. Install the lower steering column shroud and the 3 screws.
4. Attach the upper steering column shroud to the lower steering column shroud.
Vehicles installing a new clockspring
5. Install the steering wheel.
-
After the steering wheel installation, remove the clockspring sealing key.
Vehicle repairs reusing the same clockspring