Milan FWD L4-2.3L VIN Z (2007)
Shift Cable: Adjustments
Selector Lever Cable Adjustment
6-speed transaxle
1. Disconnect the selector lever cable end from the manual lever.
2. Place the manual control lever in DRIVE.
1. Place the manual control lever in PARK.
2. Move the manual control lever counterclockwise 3 detents to the DRIVE position.
FNR5 transaxle
3. Disconnect the selector lever cable end from the manual lever.
4. NOTE: Transaxle shown removed for clarity.
Place the manual control lever in NEUTRAL.
1. Place the manual control lever in PARK.
2. Move the manual control lever clockwise 3 detents to the DRIVE position.