Milan FWD L4-2.3L VIN Z (2007)
Removal
All vehicles
1. Remove the heater core and evaporator core housing.
2. Remove the restraint control module (RCM).
6 speed transaxle
3. Remove the battery tray.
4. Disconnect the selector lever cable end from the manual lever.
5. Release the 2 tabs and remove the selector lever cable from the selector lever cable bracket.
FNR5 transaxle
6. Disconnect the selector lever cable end from the manual lever.
7. Release the 2 tabs and remove the selector lever cable from the selector lever cable bracket.
