Milan FWD L4-2.3L VIN Z (2007)
Vehicles equipped with LED illumination
8. Disconnect the LED electrical connector.
Vehicles equipped with a transmission control (TC) switch
9. Disconnect the transmission control (TC) switch electrical connector and remove the wiring harness fastener from the selector lever housing.
All vehicles
10. NOTE: Selector lever removed for clarity.
Release the 3 tabs and remove the PRNDL bezel selector lever knob and knob bezel.
Installation
Vehicles equipped with a TC switch
1. Route the TC switch wiring harness through the selector lever knob bezel and the PRNDL bezel.