Milan FWD L4-2.3L VIN Z (2007)
3.0L vehicles
3. Install the 2 intermediate shaft support bracket bolts.
-
Tighten to 40 Nm (30 ft. lbs.).
3.5L vehicles
4. Install the 3 intermediate shaft bearing support bracket bolts.
-
Tighten to 40 Nm (30 ft. lbs.).
5. Install the catalytic converter support bracket and install the 2 nuts.
-
Tighten to 23 Nm (17 ft. lbs.).
6. Install the 2 catalytic converter bracket bolts.
-
Tighten to 20 Nm (15 ft. lbs.).
All vehicles