Milan FWD L4-2.3L VIN Z (2007)
Flex Plate: Specifications
Flexplate
Install the flexplate and tighten the bolts in the sequence shown in 3 stages.
NOTE: Special bolts are used for installation. Do not use standard bolts.
^
Stage 1: Tighten to ......................................................................................................................................................................... 50 Nm (37 ft. lbs.)
^
Stage 2: Tighten to ......................................................................................................................................................................... 80 Nm (59 ft. lbs.)
^
Stage 3: Tighten to ....................................................................................................................................................................... 112 Nm (83 ft. lbs.)