Milan FWD L4-2.3L VIN Z (2007)
4. Tape the window in position, then lower the window regulator downward until it reaches the stops at the bottom of the regulator tracks.
5. Remove the door speaker.
6. Remove the interior door handle screw and position the door handle aside.
7. Disconnect the wiring harness retainers.
8. Remove the wiring harness cover plate and disconnect the 2 door latch cable retainers.
9. Remove the 10 door module bolts.
-
To install, tighten to 11 Nm (8 lb-ft).