Milan FWD L4-2.5L (2010)
Installation
1. Position TR sensor on the manual shaft, align the 2 TR sensor bolt holes and install the 2 bolts.
-
Tighten to 5 Nm (44 lb-in).
2. Install the manual control lever and the nut.
-
Tighten to 12 Nm (106 lb-in).
3. Connect the TR sensor electrical connector.
4. Adjust the selector lever cable. For additional information, refer to Automatic Transmission/Transaxle. Connect the selector lever cable end.
5. Install the underbody cover and 7 screws.
