Milan FWD V6-3.0L (2010)
13. NOTE: The steering gear is not removed with the front subframe and must be positioned aside.
Position the steering gear aside using mechanic's wire.
Vehicles equipped with EPAS
14. Remove the exhaust flexible pipe.
15. Disconnect the 2 front EPAS in-line electrical connectors and the 4 wiring retainers.
16. Remove the EPAS ground wire bolt.
-
To install, tighten to 10 Nm (89 lb-in).
All vehicles
17. Remove the bolt from the roll restrictor.
18. Remove the 2 upper stabilizer bar link nuts (one each side) and separate from the stabilizer bar.
