Milan FWD V6-3.0L (2010)
18. Install the RH recliner outboard cover, retainer and retainer cover.
-
Route the side air bag wire harness to the RH recliner outboard cover.
19. Install a new cushion side shield (includes new retainers attached).
-
Attach the side air bag wire harness pin-type retainers to the cushion side shield.
20. Put the spring clip on the manual recliner handle. Align it to the recliner and push in, seating the spring clip.
21. Install the front seat. For additional information, refer to Seat - Front See: Service and Repair/Seat - Front.