Milan FWD V6-3.0L (2010)
4. Install the wheel and tire. For additional information, refer to Wheels and Tires.
5. Cycle the park brake several times to verify normal operation.
-
Apply brakes several times to verify correct brake operation.
Brake Disc Shield
Brake Disc Shield - Front Wheel Drive (FWD)
Removal and Installation
1. Remove the wheel bearing and wheel hub. For additional information, refer to Rear Suspension.
2. Remove the 3 brake disc shield bolts and the brake disc shield.
-
To install, tighten to 23 Nm (17 lb-ft).
3. To install, reverse the removal procedure.
