Milan FWD V6-3.0L (2010)
8. Remove the 3 auxiliary coolant pump bracket bolts and position the auxiliary coolant pump aside.
-
To install, tighten the bolts to 25 Nm (18 lb-ft).
9. Disconnect the vacuum pump electrical connector.
10. Remove the vacuum pump bracket nut.
-
To install, tighten to 25 Nm (18 lb-ft).
11. Remove the vacuum pump bracket bolt.
-
To install, tighten the bolts to 25 Nm (18 lb-ft).
-
Position the vacuum pump to release the clamp, detach the vacuum hose and remove the vacuum pump.
12. To install, reverse the removal procedure.
