Milan FWD V6-3.0L (2010)
Camshaft Roller Follower
Camshaft Roller Follower
Removal and Installation
NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while
cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the LH and RH valve covers. For additional information, refer to Valve Cover - LH See: Cylinder Head Assembly/Valve Cover/Service
and Repair/Valve Cover - LH and Valve Cover - RH See: Cylinder Head Assembly/Valve Cover/Service and Repair/Valve Cover - RH.
3. NOTICE: Only use hand tools when removing or installing the spark plugs or damage can occur to the cylinder head or spark plug.
Remove the 6 spark plugs.
-
To install, tighten to 15 Nm (133 lb-in).
4. Remove the 4 screws and position the RH fender splash shield aside.
