Milan FWD V6-3.0L (2010)
Piston: Overhaul
Piston
Disassembly
1. Remove the piston rings from the piston.
-
Discard the piston rings.
2. Remove the 2 piston pin retainers and the piston pin.
3. NOTE: If the piston and connecting rod are to be reinstalled, they must be assembled in the same orientation. Mark the piston orientation to the
connecting rod for reassembly.
Separate the piston from the connecting rod.
4. Clean and inspect the piston and connecting rod. For additional information, refer to Engine.
Assembly
1. Align the piston-to-connecting rod orientation marks and position the connecting rod in the piston.
2. Lubricate the piston pin and pin bore with clean engine oil.